|
|
|
IR Remote Control Code Analyzer
|
Features:
1.The IR SAMPLER is designed with high-speed micro-controller and high accurate measuring.
2. Receive the signals directly from the remote controller ,need not to destroy the remote controller when testing.
3. The intact wave-form can be showed clearly and steadily on the computer, this is that most of the oscilloscope can't realize.
4.It can test the width of pulse, the length of code, Number of bits, lead code, system code, key code, repeat code, etc
5. Users can define the methods of decoding by themselves.
6. Save the history notes voluntarily.
7.Support 38KHz signals.
8.It can test frequency of carrier.
9.Support up to 4 seconds sample period.
10 .There are 4 channels for showing the wave-form ,and it's easy to compare for wave-form , each channel can work in one of six modes.
11.Support up to 100 kinds of formats.
12.The program run under Win95, Win98, WinMe, WIN2000 or WinXP, the interface is friendly and beautiful, and you can set the interface what you like.
13.Users can save, review and share the wave-form.
14.Zoom in, Zoom out, showing of average value.
15.Showing of invert waveform..
16. Users can drag the waveform from showing window to favorite box and save it.
17.Get time between any two points.
18.receive correctly the commands from TV, VCR, VCD, DVD, air-condition remote controllers. Etc
19. Sound clue on. |
| |
| How to use? |
| Step 1. connect the sampler to serial port of computer by serial communication wire, you can connect it to COM1 or COM2.Then open the power. |
| Step 2. select mode |
Step 3. Transmit an IR signal to sample by any IR remote controller, the waveform of signal can be seen on the window, if not, please check the communication wire and port are right or not.
|
| View sample pouse picture |
| download the softwore |
| |
| About batch check control mode : |
| Down Key number -1 (confines 1-40) |
| Up Key number +1 (confines 1-40) |
| Learn Learn IR signal to this key |
| Rename you can rename the key name . acquiesce is "key 1" --"key 40 " key name. |
| save save as text format . |
Manipulating FLASH : 
|
|
|
|
